SYNFLEX INDUSTRIES
13 product families across cable protection, connection systems, accessories and industrial tubing.
Browse all products
A practical external repair and reinforcement wrap for damaged cable sheaths, joints and weakened sections. Flexible during application, it conforms around the repair area and cures into a rigid protective shell.
| Parameter | Value |
|---|---|
| Product type | Water-activated fiberglass structural repair wrap |
| Activation method | Clean water, per supplied instruction |
| Reinforcement | Fiberglass |
| Application method | Wrapped around repair area with consistent overlap |
| Cure | Hardens into a rigid protective shell; no powered heating equipment required |
| Standard width | 100 mm |
| Positioning | External structural and sheath-repair product — not primary electrical insulation |
Select roll length based on repair area and required overlap.
| Product code | Width | Length | Typical selection |
|---|---|---|---|
| SF-SRW-100-15 | 100 mm | 1.5 m | Small or localized repairs |
| SF-SRW-100-30 | 100 mm | 3.0 m | General-purpose repair work |
| SF-SRW-100-45 | 100 mm | 4.5 m | Larger joints or extended repair areas |
Designed for maintenance teams that need an external structural repair layer without a bulky mechanical enclosure.
Water activation keeps the field process straightforward and reduces dependence on powered curing equipment.
The flexible construction can be worked around round, tapered and uneven profiles before it hardens.
Creates a rigid outer shell around repaired or weakened cable sections.
Supplied as a roll, making it easy to carry to maintenance and repair locations.
A focused repair product for external cable protection and structural reinforcement.
Reinforcement over damaged external sheath sections.
Additional external support around repaired joints and transitions.
Useful where access, tools or repair space are limited.
Conforms around non-uniform cable and joint geometries.
Illustrative renders — final appearance may vary. To be replaced with production photography once available.
Always follow the current product instruction supplied with the material and confirm that the repair method is suitable for the cable system.
Clean and inspect the repair area. Remove loose contamination and damaged fragments.
Activate the repair wrap with clean water in accordance with the supplied instruction.
Apply the material around the repair area with consistent overlap and firm contact.
Keep the repair undisturbed until the wrap has hardened before returning the system to service.
It is intended as an external structural repair and reinforcement wrap for damaged cable sheaths, joints, splices and similar maintenance repairs.
The product is water activated and is designed to cure without powered heating equipment. Follow the supplied application instruction for the exact product.
The standard Synflex range is 100 mm nominal width in 1.5 m, 3.0 m and 4.5 m roll lengths.
No. STRUCTAWRAP SR is positioned as an external structural and sheath-repair product. Electrical insulation requirements must be addressed by the approved repair system for the cable.
Compliance and performance references shown here apply to this material grade and part-number range. Confirm the applicable certificate or test report before approval or commercial issue. See Quality & Compliance.
Tell us the size you need, and we'll confirm the matching product code and compatible components.